[Из песочницы] Ловим snmp трапы mac-notification с устройств Cisco

#

# SNMPTT v1.4 Configuration File

#

# Linux / Unix

#

[General]

# Name of this system for $H variable. If blank, system name will be the computer's

# hostname via Sys::Hostname.

snmptt_system_name =

# Set to either 'standalone' or 'daemon'

# standalone: snmptt called from snmptrapd.conf

# daemon: snmptrapd.conf calls snmptthandler

# Ignored by Windows. See documentation

mode = standalone

# Set to 1 to allow multiple trap definitions to be executed for the same trap.

# Set to 0 to have it stop after the first match.

# This option should normally be set to 1. See the section 'SNMPTT.CONF Configuration

# file Notes' in the SNMPTT documentation for more information.

# Note: Wildcard matches are only matched if there are NO exact matches. This takes

# into consideration the NODES list. Therefore, if there is a matching trap, but

# the NODES list prevents it from being considered a match, the wildcard entry will

# only be used if there are no other exact matches.

multiple_event = 1

# SNMPTRAPD passes the IP address of device sending the trap, and the IP address of the

# actual SNMP agent. These addresses could differ if the trap was sent on behalf of another

# device (relay, proxy etc).

# If DNS is enabled, the agent IP address is converted to a host name using a DNS lookup

# (which includes the local hosts file, depending on how the OS is configured). This name

# will be used for: NODES entry matches, hostname field in logged traps (file / database),

# and the $A variable. Host names on the NODES line will be resolved and the IP address

# will then be used for comparing.

# Set to 0 to disable DNS resolution

# Set to 1 to enable DNS resolution

dns_enable = 0

# Set to 0 to enable the use of FQDN (Fully Qualified Domain Names). If a host name is

# passed to SNMPTT that contains a domain name, it will not be altered in any way by

# SNMPTT. This also affects resolve_value_ip_addresses.

# Set to 1 to have SNMPTT strip the domain name from the host name passed to it. For

# example, server01.domain.com would be changed to server01

# Set to 2 to have SNMPTT strip the domain name from the host name passed to it

# based on the list of domains in strip_domain_list

strip_domain = 0

# List of domain names that should be stripped when strip_domain is set to 2.

# List can contain one or more domains. For example, if the FQDN of a host is

# server01.city.domain.com and the list contains domain.com, the 'host' will be

# set as server01.city.

strip_domain_list = <<END

domain.com

END

# Configures how IP addresses contained in the VALUE of the variable bindings are handled.

# This only applies to the values for $n, $+n, $-n, $vn, $+*, $-*.

# Set to 0 to disable resolving ip address to host names

# Set to 1 to enable resolving ip address to host names

# Note: net_snmp_perl_enable *must* be enabled. The strip_domain settings influence the

# format of the resolved host name. DNS must be enabled (dns_enable)

resolve_value_ip_addresses = 0

# Set to 1 to enable the use of the Perl module from the UCD-SNMP / NET-SNMP package.

# This is required for $v variable substitution to work, and also for some other options

# that are enabled in this .ini file.

# Set to 0 to disable the use of the Perl module from the UCD-SNMP / NET-SNMP package.

# Note: Enabling this with stand-alone mode can cause SNMPTT to run very slowly due to

# the loading of the MIBS at startup.

net_snmp_perl_enable = 0

# Set to 1 to enable caching of OID and ENUM translations when net_snmp_perl_enable is

# enabled. Enabling this should result in faster translations.

# Set to 0 to disable caching.

# Note: Restart SNMPTT after updating the MIB files for Net-SNMP, otherwise the cache may

# contain inaccurate data. Defaults to 1.

net_snmp_perl_cache_enable = 1

# This sets the best_guess parameter used by the UCD-SNMP / NET-SNMP Perl module for

# translating symbolic nams to OIDs and vice versa.

# For UCD-SNMP, and Net-SNMP 5.0.8 and previous versions, set this value to 0.

# For Net-SNMP 5.0.9, or any Net-SNMP with patch 722075 applied, set this value to 2.

# A value of 2 is equivalent to -IR on Net-SNMP command line utilities.

# UCD-SNMP and Net-SNMP 5.0.8 and previous may not be able to translate certain formats of

# symbolic names such as RFC1213-MIB::sysDescr. Net-SNMP 5.0.9 or patch 722075 will allow

# all possibilities to be translated. See the FAQ section in the README for more info

net_snmp_perl_best_guess = 0

# Configures how the OID of the received trap is handled when outputting to a log file /

# database. It does NOT apply to the $O variable.

# Set to 0 to use the default of numerical OID

# Set to 1 to translate the trap OID to short text (symbolic form) (eg: linkUp)

# Set to 2 to translate the trap OID to short text with module name (eg: IF-MIB::linkUp)

# Set to 3 to translate the trap OID to long text (eg: iso...snmpTraps.linkUp)

# Set to 4 to translate the trap OID to long text with module name (eg:

# IF-MIB::iso...snmpTraps.linkUp)

# Note: -The output of the long format will vary depending on the version of Net-SNMP you

# are using.

# -net_snmp_perl_enable *must* be enabled

# -If using database logging, ensure the trapoid column is large enough to hold the

# entire line

translate_log_trap_oid = 0

# Configures how OIDs contained in the VALUE of the variable bindings are handled.

# This only applies to the values for $n, $+n, $-n, $vn, $+*, $-*. For substitutions

# that include variable NAMES ($+n etc), only the variable VALUE is affected.

# Set to 0 to disable translating OID values to text (symbolic form)

# Set to 1 to translate OID values to short text (symbolic form) (eg: BuildingAlarm)

# Set to 2 to translate OID values to short text with module name (eg: UPS-MIB::BuildingAlarm)

# Set to 3 to translate OID values to long text (eg: iso...upsAlarm.BuildingAlarm)

# Set to 4 to translate OID values to long text with module name (eg:

# UPS-MIB::iso...upsAlarm.BuildingAlarm)

# For example, if the value contained: 'A UPS Alarm (.1.3.6.1.4.1.534.1.7.12) has cleared.',

# it could be translated to: 'A UPS Alarm (UPS-MIB::BuildingAlarm) has cleared.'

# Note: net_snmp_perl_enable *must* be enabled

translate_value_oids = 1

# Configures how the symbolic enterprise OID will be displayed for $E.

# Set to 1, 2, 3 or 4. See translate_value_oids options 1,2,3 and 4.

# Note: net_snmp_perl_enable *must* be enabled

translate_enterprise_oid_format = 1

# Configures how the symbolic trap OID will be displayed for $O.

# Set to 1, 2, 3 or 4. See translate_value_oids options 1,2,3 and 4.

# Note: net_snmp_perl_enable *must* be enabled

translate_trap_oid_format = 1

# Configures how the symbolic trap OID will be displayed for $v, $-n, $+n, $-* and $+*.

# Set to 1, 2, 3 or 4. See translate_value_oids options 1,2,3 and 4.

# Note: net_snmp_perl_enable *must* be enabled

translate_varname_oid_format = 1

# Set to 0 to disable converting INTEGER values to enumeration tags as defined in the

# MIB files

# Set to 1 to enable converting INTEGER values to enumeration tags as defined in the

# MIB files

# Example: moverDoorState:open instead of moverDoorState:2

# Note: net_snmp_perl_enable *must* be enabled

translate_integers = 1

# Allows you to set the MIBS environment variable used by SNMPTT

# Leave blank or comment out to have the systems enviroment settings used

# To have all MIBS processed, set to ALL

# See the snmp.conf manual page for more info

mibs_environment = ALL

# Set what is used to separate variables when wildcards are expanded on the FORMAT /

# EXEC line. Defaults to a space. Value MUST be within quotes. Can contain 1 or

# more characters

wildcard_expansion_separator = " "

# Set to 1 to allow unsafe REGEX code to be executed.

# Set to 0 to prevent unsafe REGEX code from being executed (default).

# Enabling unsafe REGEX code will allow variable interopolation and the use of the e

# modifier to allow statements such as substitution with captures such

# as: (one (two) three)(five $1 six)

# which outputs: five two six

# or: (one (two) three)(«five ».length($1)." six")e

# which outputs: five 3 six

#

# This is considered unsafe because the contents of the regular expression

# (right) is executed (eval) by Perl which *could contain unsafe code*.

# BE SURE THAT THE SNMPTT CONFIGURATION FILES ARE SECURE!

allow_unsafe_regex = 0

# Set to 1 to have the backslash (escape) removed from quotes passed from

# snmptrapd. For example, \" would be changed to just "

# Set to 0 to disable

remove_backslash_from_quotes = 0

# Set to 1 to have NODES files loaded each time a trap is processed.

# Set to 0 to have all NODES files loaded when the snmptt.conf files are loaded.

# If NODES files are used (files that contain lists of NODES), then setting to 1

# will cause the list to be loaded each time an EVENT is processed that uses

# NODES files. This will allow the NODES file to be modified while SNMPTT is

# running but can result in many file reads depending on the number of traps

# received. Defaults to 0

dynamic_nodes = 0

# This option allows you to use the $D substitution variable to include the

# description text from the SNMPTT.CONF or MIB files.

# Set to 0 to disable the $D substitution variable. If $D is used, nothing

# will be outputted.

# Set to 1 to enable the $D substitution variable and have it use the

# descriptions stored in the SNMPTT .conf files. Enabling this option can

# greatly increase the amount of memory used by SNMPTT.

# Set to 2 to enable the $D substitution variable and have it use the

# description from the MIB files. This enables the UCD-SNMP / NET-SNMP Perl

# module save_descriptions variable. Enabling this option can greatly

# increase the amount of memory used by the Net-SNMP SNMP Perl module, which

# will result in an increase of memory usage by SNMPTT.

description_mode = 0

# Set to 1 to remove any white space at the start of each line from the MIB

# or SNMPTT.CONF description when description_mode is set to 1 or 2.

description_clean = 1

# Warning: Experimental. Not recommended for production environments.

# When threads are enabled, SNMPTT may quit unexpectedly.

# Set to 1 to enable threads (ithreads) in Perl 5.6.0 or higher. If enabled,

# EXEC will launch in a thread to allow SNMPTT to continue processing other

# traps. See also threads_max.

# Set to 0 to disable threads (ithreads).

# Defaults to 0

threads_enable = 0

# Warning: Experimental. Not recommended for production environments.

# When threads are enabled, SNMPTT may quit unexpectedly.

# This option allows you to set the maximum number of threads that will

# execute at once. Defaults to 10

threads_max = 10

# The date format for $x in strftime() format. If not defined, defaults

# to %a %b %e %Y.

#date_format = %a %b %e %Y

# The time format for $X in strftime() format. If not defined, defaults

# to %H:%M:%S.

#time_format = %H:%M:%S

# The date time format in strftime() format for the date/time when logging

# to standard output, snmptt log files (log_file) and the unknown log file

# (unknown_trap_log_file). Defaults to localtime(). For SQL, see

# date_time_format_sql.

# Example: %a %b %e %Y %H:%M:%S

date_time_format = %H:%M:%S %Y/%m/%d

[DaemonMode]

# Set to 1 to have snmptt fork to the background when run in daemon mode

# Ignored by Windows. See documentation

daemon_fork = 1

# Set to the numerical user id (eg: 500) or textual user id (eg: snmptt)

# that snmptt should change to when running in daemon mode. Leave blank

# to disable. The user used should have read/write access to all log

# files, the spool folder, and read access to the configuration files.

# Only use this if you are starting snmptt as root.

# A second (child) process will be started as the daemon_uid user so

# there will be two snmptt processes running. The first process will

# continue to run as the user that ran snmptt (root), waiting for the

# child to quit. After the child quits, the parent process will remove

# the snmptt.pid file and exit.

daemon_uid = snmptt

# Complete path of file to store process ID when running in daemon mode.

pid_file = /var/run/snmptt.pid

# Directory to read received traps from. Ex: /var/spool/snmptt/

# Don't forget the trailing slash!

spool_directory = /var/spool/snmptt/

# Amount of time in seconds to sleep between processing spool files

sleep = 5

# Set to 1 to have SNMPTT use the time that the trap was processed by SNMPTTHANDLER

# Set to 0 to have SNMPTT use the time the trap was processed. Note: Using 0 can

# result in the time being off by the number of seconds used for 'sleep'

use_trap_time = 1

# Set to 0 to have SNMPTT erase the spooled trap file after it attempts to process

# the trap even if it did not successfully log the trap to any of the log systems.

# Set to 1 to have SNMPTT erase the spooled trap file only after it successfully

# logs to at least ONE log system.

# Set to 2 to have SNMPTT erase the spooled trap file only after it successfully

# logs to ALL of the enabled log systems. Warning: If multiple log systems are

# enabled and only one fails, the other log system will continuously be logged to

# until ALL of the log systems function.

# The recommended setting is 1 with only one log system enabled.

keep_unlogged_traps = 1

# How often duplicate traps will be processed. An MD5 hash of all incoming traps

# is stored in memory and is used to check for duplicates. All variables except for

# the uptime variable are used when calculating the MD5. The larger this variable,

# the more memory snmptt will require.

# Note: In most cases it may be a good idea to enable this but sometimes it can have a

# negative effect. For example, if you are trying to troubleshoot a wireless device

# that keeps losing it's connection you may want to disable this so that you see

# all the associations and disassociations.

# 5 minutes = 300

# 10 minutes = 600

# 15 minutes = 900

duplicate_trap_window = 0

[Logging]

# Set to 1 to enable messages to be sent to standard output, or 0 to disable.

# Would normally be disabled unless you are piping this program to another

stdout_enable = 0

# Set to 1 to enable text logging of *TRAPS*. Make sure you specify a log_file

# location

log_enable = 1

# Log file location. The COMPLETE path and filename. Ex: '/var/log/snmptt/snmptt.log'

log_file = /tmp/my_traps.tmp

# Set to 1 to enable text logging of *SNMPTT system errors*. Make sure you

# specify a log_system_file location

log_system_enable = 0

# Log file location. The COMPLETE path and filename.

# Ex: '/var/log/snmptt/snmpttsystem.log'

log_system_file = /var/log/snmptt/snmpttsystem.log

# Set to 1 to enable logging of unknown traps. This should normally be left off

# as the file could grow large quickly. Used primarily for troubleshooting. If

# you have defined a trap in snmptt.conf, but it is not executing, enable this to

# see if it is being considered an unknown trap due to an incorrect entry or

# simply missing from the snmptt.conf file.

# Unknown traps can be logged either a text file, a SQL table or both.

# See SQL section to define a SQL table to log unknown traps to.

unknown_trap_log_enable = 1

# Unknown trap log file location. The COMPLETE path and filename.

# Ex: '/var/log/snmptt/snmpttunknown.log'

# Leave blank to disable logging to text file if logging to SQL is enabled

# for unknown traps

unknown_trap_log_file = /var/log/snmptt/snmpttunknown.log

# How often in seconds statistics should be logged to syslog or the event log.

# Set to 0 to disable

# 1 hour = 216000

# 12 hours = 2592000

# 24 hours = 5184000

statistics_interval = 0

# Set to 1 to enable logging of *TRAPS* to syslog. If you do not have the Sys::Syslog

# module then disable this. Windows users should disable this.

syslog_enable = 1

# Syslog facility to use for logging of *TRAPS*. For example: 'local0'

syslog_facility = local0

# Set the syslog level for *TRAPS* based on the severity level of the trap

# as defined in the snmptt.conf file. Values must be one per line between

# the syslog_level_* and END lines, and are not case sensitive. For example:

# Warning

# Critical

# Duplicate definitions will use the definition with the higher severity.

syslog_level_debug = <<END

END

syslog_level_info = <<END

END

syslog_level_notice = <<END

END

syslog_level_warning = <<END

END

syslog_level_err = <<END

END

syslog_level_crit = <<END

END

syslog_level_alert = <<END

END

# Syslog default level to use for logging of *TRAPS*. For example: warning

# Valid values: emerg, alert, crit, err, warning, notice, info, debug

syslog_level = warning

# Set to 1 to enable logging of *SNMPTT system errors* to syslog. If you do not have the

# Sys::Syslog module then disable this. Windows users should disable this.

syslog_system_enable = 1

# Syslog facility to use for logging of *SNMPTT system errors*. For example: 'local0'

syslog_system_facility = local0

# Syslog level to use for logging of *SNMPTT system errors*… For example: 'warning'

# Valid values: emerg, alert, crit, err, warning, notice, info, debug

syslog_system_level = warning

[SQL]

# Determines if the enterprise column contains the numeric OID or symbolic OID

# Set to 0 for numeric OID

# Set to 1 for symbolic OID

# Uses translate_enterprise_oid_format to determine format

# Note: net_snmp_perl_enable *must* be enabled

db_translate_enterprise = 0

# FORMAT line to use for unknown traps. If not defined, defaults to $-*.

db_unknown_trap_format = '$-*'

# List of custom SQL column names and values for the table of received traps

# (defined by *_table below). The format is

# column name

# value

#

# For example:

#

# binding_count

# $#

# uptime2

# The agent has been up for $T.

sql_custom_columns = <<END

END

# List of custom SQL column names and values for the table of unknown traps

# (defined by *_table_unknown below). See sql_custom_columns for the format.

sql_custom_columns_unknown = <<END

END

# MySQL: Set to 1 to enable logging to a MySQL database via DBI (Linux / Windows)

# This requires DBI:: and DBD::mysql

mysql_dbi_enable = 0

# MySQL: Hostname of database server (optional — default localhost)

mysql_dbi_host = localhost

# MySQL: Port number of database server (optional — default 3306)

mysql_dbi_port = 3306

# MySQL: Database to use

mysql_dbi_database = snmptt

# MySQL: Table to use

mysql_dbi_table = snmptt

# MySQL: Table to use for unknown traps

# Leave blank to disable logging of unknown traps to MySQL

# Note: unknown_trap_log_enable must be enabled.

mysql_dbi_table_unknown = snmptt_unknown

# MySQL: Table to use for statistics

# Note: statistics_interval must be set. See also stat_time_format_sql.

#mysql_dbi_table_statistics = snmptt_statistics

mysql_dbi_table_statistics =

# MySQL: Username to use

mysql_dbi_username = snmpttuser

# MySQL: Password to use

mysql_dbi_password = password

# MySQL: Whether or not to 'ping' the database before attempting an INSERT

# to ensure the connection is still valid. If *any* error is generate by

# the ping such as 'Unable to connect to database', it will attempt to

# re-create the database connection.

# Set to 0 to disable

# Set to 1 to enable

# Note: This has no effect on mysql_ping_interval.

mysql_ping_on_insert = 1

# MySQL: How often in seconds the database should be 'pinged' to ensure the

# connection is still valid. If *any* error is generate by the ping such as

# 'Unable to connect to database', it will attempt to re-create the database

# connection. Set to 0 to disable pinging.

# Note: This has no effect on mysql_ping_on_insert.

# disabled = 0

# 5 minutes = 300

# 15 minutes = 900

# 30 minutes = 1800

mysql_ping_interval = 300

# PostgreSQL: Set to 1 to enable logging to a PostgreSQL database via DBI (Linux / Windows)

# This requires DBI:: and DBD::PgPP

postgresql_dbi_enable = 0

# Set to 0 to use the DBD::PgPP module

# Set to 1 to use the DBD::Pg module

postgresql_dbi_module = 0

# Set to 0 to disable host and port network support

# Set to 1 to enable host and port network support

# If set to 1, ensure PostgreSQL is configured to allow connections via TCPIP by setting

# tcpip_socket = true in the $PGDATA/postgresql.conf file, and adding the ip address of

# the SNMPTT server to $PGDATApg_hba.conf. The common location for the config files for

# RPM installations of PostgreSQL is /var/lib/pgsql/data.

postgresql_dbi_hostport_enable = 0

# PostgreSQL: Hostname of database server (optional — default localhost)

postgresql_dbi_host = localhost

# PostgreSQL: Port number of database server (optional — default 5432)

postgresql_dbi_port = 5432

# PostgreSQL: Database to use

postgresql_dbi_database = snmptt

# PostgreSQL: Table to use for unknown traps

# Leave blank to disable logging of unknown traps to PostgreSQL

# Note: unknown_trap_log_enable must be enabled.

postgresql_dbi_table_unknown = snmptt_unknown

# PostgreSQL: Table to use for statistics

# Note: statistics_interval must be set. See also stat_time_format_sql.

#postgresql_dbi_table_statistics = snmptt_statistics

postgresql_dbi_table_statistics =

# PostgreSQL: Table to use

postgresql_dbi_table = snmptt

# PostgreSQL: Username to use

postgresql_dbi_username = snmpttuser

# PostgreSQL: Password to use

postgresql_dbi_password = password

# PostgreSQL: Whether or not to 'ping' the database before attempting an INSERT

# to ensure the connection is still valid. If *any* error is generate by

# the ping such as 'Unable to connect to database', it will attempt to

# re-create the database connection.

# Set to 0 to disable

# Set to 1 to enable

# Note: This has no effect on postgresqll_ping_interval.

postgresql_ping_on_insert = 1

# PostgreSQL: How often in seconds the database should be 'pinged' to ensure the

# connection is still valid. If *any* error is generate by the ping such as

# 'Unable to connect to database', it will attempt to re-create the database

# connection. Set to 0 to disable pinging.

# Note: This has no effect on postgresql_ping_on_insert.

# disabled = 0

# 5 minutes = 300

# 15 minutes = 900

# 30 minutes = 1800

postgresql_ping_interval = 300

# ODBC: Set to 1 to enable logging to a database via ODBC using DBD::ODBC.

# This requires both DBI:: and DBD::ODBC

dbd_odbc_enable = 0

# DBD:ODBC: Database to use

dbd_odbc_dsn = snmptt

# DBD:ODBC: Table to use

dbd_odbc_table = snmptt

# DBD:ODBC: Table to use for unknown traps

# Leave blank to disable logging of unknown traps to DBD:ODBC

# Note: unknown_trap_log_enable must be enabled.

dbd_odbc_table_unknown = snmptt_unknown

# DBD:ODBC: Table to use for statistics

# Note: statistics_interval must be set. See also stat_time_format_sql.

#dbd_odbc_table_statistics = snmptt_statistics

dbd_odbc_table_statistics =

# DBD:ODBC: Username to use

dbd_odbc_username = snmptt

# DBD:DBC:: Password to use

dbd_odbc_password = password

# DBD:ODBC: Whether or not to 'ping' the database before attempting an INSERT

# to ensure the connection is still valid. If *any* error is generate by

# the ping such as 'Unable to connect to database', it will attempt to

# re-create the database connection.

# Set to 0 to disable

# Set to 1 to enable

# Note: This has no effect on dbd_odbc_ping_interval.

dbd_odbc_ping_on_insert = 1

# DBD:ODBC:: How often in seconds the database should be 'pinged' to ensure the

# connection is still valid. If *any* error is generate by the ping such as

# 'Unable to connect to database', it will attempt to re-create the database

# connection. Set to 0 to disable pinging.

# Note: This has no effect on dbd_odbc_ping_on_insert.

# disabled = 0

# 5 minutes = 300

# 15 minutes = 900

# 30 minutes = 1800

dbd_odbc_ping_interval = 300

# The date time format for the traptime column in SQL. Defaults to

# localtime(). When a date/time field is used in SQL, this should

# be changed to follow a standard that is supported by the SQL server.

# Example: For a MySQL DATETIME, use %Y-%m-%d %H:%M:%S.

#date_time_format_sql =

# The date time format for the stat_time column in SQL. Defaults to

# localtime(). When a date/time field is used in SQL, this should

# be changed to follow a standard that is supported by the SQL server.

# Example: For a MySQL DATETIME, use %Y-%m-%d %H:%M:%S.

#stat_time_format_sql =

[Exec]

# Set to 1 to allow EXEC statements to execute. Should normally be left on unless you

# want to temporarily disable all EXEC commands

exec_enable = 1

# Set to 1 to allow PREEXEC statements to execute. Should normally be left on unless you

# want to temporarily disable all PREEXEC commands

pre_exec_enable = 1

# If defined, the following command will be executed for ALL unknown traps. Passed to the

# command will be all standard and enterprise variables, similar to unknown_trap_log_file

# but without the newlines.

unknown_trap_exec =

# FORMAT line that is passed to the unknown_trap_exec command. If not defined, it

# defaults to what is described in the unknown_trap_exec setting. The following

# would be *similar* to the default described in the unknown_trap_exec setting

# (all on one line):

# $x!!! $X: Unknown trap ($o) received from $A at: Value 0: $A Value 1: $aR

# Value 2: $T Value 3: $o Value 4: $aA Value 5: $C Value 6: $e Ent Values: $+*

unknown_trap_exec_format =

# Set to 1 to escape wildards (* and ?) in EXEC, PREEXEC and the unknown_trap_exec

# commands. Enable this to prevent the shell from expanding the wildcard

# characters. The default is 1.

exec_escape = 1

[Debugging]

# 0 — do not output messages

# 1 — output some basic messages

# 2 — out all messages

DEBUGGING = 2

# Debugging file — SNMPTT

# Location of debugging output file. Leave blank to default to STDOUT (good for

# standalone mode, or daemon mode without forking)

DEBUGGING_FILE = /tmp/snmptt.debug

# DEBUGGING_FILE = /var/log/snmptt/snmptt.debug

# Debugging file — SNMPTTHANDLER

# Location of debugging output file. Leave blank to default to STDOUT

DEBUGGING_FILE_HANDLER =

# DEBUGGING_FILE_HANDLER = /var/log/snmptt/snmptthandler.debug

[TrapFiles]

# A list of snmptt.conf files (this is NOT the snmptrapd.conf file). The COMPLETE path

# and filename. Ex: '/etc/snmp/snmptt.conf'

snmptt_conf_files = <<END

/etc/snmp/snmptt.conf

END

This entry passed through the Full-Text RSS service - if this is your content and you're reading it on someone else's site, please read the FAQ at http://ift.tt/jcXqJW.